7 Tips For Massive Arms

63

Upper arm development is probably one of the most sought-after bodybuilding goals.
I have yet to meet an elite pro bodybuilder pleased with his upper arm development, even though that arm development exceeds the 20-inch circumference.

If you’ve been frustrated recently with your lack of progress in upper arm development, follow any one of the seven tips given here and you are surely going to experience new growth in record time.

1. Don’t train biceps with back and triceps with chest.
Training biceps after doing your back routine and training your triceps after a chest workout are antiquated training concepts. For example, when one does a full back workout, there’s plenty of residual fatigue in the elbow flexors from all the chins, rows and pulldown exercises that drastically reduce the training poundages in all curling exercises, thus falling short of optimal loading for the elbow flexors. At this point, you are using loads that fall short of the optimal training zone for overloading properly the contractile proteins. I strongly suggest that in order to improve the strength and size of your upper arms, they should be trained alone as a training unit. That leads us to point number two.

2. Train using the double station system.
For every elbow flexion exercise, you should alternate an elbow extension exercise. Even though you may be thinking I’m just talking about supersetting biceps and triceps, I beg to differ on a subtlety. With a superset, little or no rest is taken between the agonist and the antagonist muscles. In the approach I strongly endorse, I prefer to use longer breaks between the two stations for the following reasons.

By having the antagonistic pairs contracting alternately (e.g. flexion followed by extension) as opposed to agonist contractions alone (precontraction of antagonists), the ability of achieving full motor unit activation (MUA) in a muscle contraction may be enhanced when immediately preceded by a contraction of the antagonists. This has the added benefit of allowing you to double the workload per training unit. It is important to alternate exercises working agonists muscles with exercises working antagonistic muscles together, while respecting long rest intervals. For example, after doing a 3RM set of close grip triceps presses, rest two to three minutes, perform a heavy set for the antagonist muscle (i.e., 3-4RM set of dumbbell curls for the biceps), rest another two to three minutes and repeat the procedure for the required number of sets.

With double station training, you get the added benefit of making sure both sides of the joints are equally loaded with optimal training loads, while in classic supersets, endurance levels may at times make the trainee compromise on utilizing the right amount of weight to overload the contractile proteins.
This is how supersets should never be done? Au contraire, I think they are very useful for bodybuilding purposes. The subtlety I’m suggesting here is to use longer rest intervals between the sets, so that greater loads can be used.

3. To gain arm strength, pause between reps.
Too often, trainees fail to make mass gains in their upper arms because their strength in biceps and triceps exercises has been stagnating for awhile. But, there is another way out. Research by Canadian exercise physiologists has shown that for a given submaximal force of contraction, motor unit activation is greater for repeated (intermittent) than for sustained contractions. Pausing between reps helps offset the oxygen debt associated with sustained contractions by various mechanisms, one of which is allowing the removal of waste products from the muscle cell that block the optimal neural drive. This type of intra-set rest allows for the recruitment of higher threshold motor units, which is essential for strength gains. Make sure these pauses are no more than 15 seconds in length and are taken where muscles can rest, such as when your arms are outstretched. If you have a high fast-twitch make-up, I recommend going toward 10-15-second breaks between reps, provided you do not do more than six reps total per set. If you are leaning more toward having a slow-twitch fiber make-up, pausing three seconds between reps should suffice, provided you do not do more than 12 reps total per set.

Related article:  Dat Creatine Bloat

4. Don’t neglect the forearms.
When a bodybuilder complains of stagnation in mass and strength gains in the elbow flexors, I often recommend adding some direct grip and forearm work. When you include direct forearm and grip work, your curling poundages go up because a few forearm muscles, such as flexor carpi radialis, contribute to elbow flexion; this leads to furthering biceps and brachialis development. As you know by now, heavier weights mean greater overload on the muscular structure, and greater overload on the muscular structure means greater hypertrophy.

Elite bodybuilders of the sixties, Chuck Sipes and Larry Scott, were known for handling Herculean weights in curling exercises. They were very strong proponents of complementary forearm training for upper arm development. The other added benefit is that the aesthetics of your upper arms will also be enhanced.

Frequently, doing three sets each of wrist flexors work, wrist extensor work and grip work, jolts one’s progress to new levels. A sample tri-set could look like this:

A-1 EZ-bar handle low palms up – Wrist Curls 3 x 15-20 reps on a 2010 tempo; rest 45 seconds.

A-2 EZ-bar handle low palms down – Wrist Curls 3 x 15-20 reps on a 2010 tempo; rest 45 seconds.

A-3 Gripping Machine 3 x 10-12 reps on a 2013 tempo; rest 45 seconds.

As you can see from the tempo, you’d isometrically hold the contraction for three seconds when the hands are closed. For the two types of low pulley wrist curls, the Tribar company makes a very interesting handle with rotating sleeve. The shape of the grip makes for a more ergonomic and comfortable position. Recently, Dorian Yates visited my training site for soft tissue work and he was quite intrigued with the Tribar handles.

When doing grip work, stay away from choppy reps. When you are lowering the grip handles, make sure on every rep that the handles are at the very tip of your fingers so it will feel like you’re just about to lose your grip.

This will insure a greater range of motion, thus greater development. Once the handles are brought back together, squeeze with all your might. Keep in mind that one of the fastest ways to improve your forearm size and gripping strength instantly is to forego the use of lifting straps when training the upper body.

5. Train your traps.
Why does trap size have anything to do with arm size and strength?

According to Dr. Ernie Hackett, DC, former World Powerlifting Champion, the stability of the cervicothoracic junction is critical for optimizing the neural and vascular supply to the upper arms. In his opinion, if the arm’s muscle mass is not balanced with the trapezius and deltoid development, the sheer weight of the arms will block its neural drive because the proper alignment of the upper extremities will be faulty. Adding some direct trap work on upper back training day should do the trick. Best choices for exercises would include one arm shrug with dumbbell or low pulley, which permits greater range of motion than raising both scapulae at the same time. Another great exercise for trap development is the power snatch from mid-thigh.

Related article:  5 Habits of People Who Always Stay Fit

6. Give the 6-12-25 method a try.
I was first exposed to the elements of this system by the works of Dr. Fred Hatfield and Don Ross who, needless to say, have considerable experience with the many aspects of training methodology. Trainees experience superb gains when they give this method a try. In this variation of the drop set method, I have added some slight twist to further enhance hypertrophy. It consists of doing a heavy set of six reps. Take a 10-second break, switch the exercise and do 10-12 reps. Take a 10-second break, switch to a new exercise and perform an agonizing 25 reps with it. After this, a much needed two-minute break is required before the cycle is repeated once, and at most, twice. One should expect to have to decrease the load between 10 to 20 percent for the second cycle to meet the desired repetitions brackets.

For the six rep sets, I prefer exercises in which the muscles are in a pre-stretched position, as in incline curls for the biceps and overhead low pulley extensions for the triceps. For the 10-12 rep sets, I prefer to use exercises that overload the mid-range of the strength curve, such as barbell curls for the biceps and dips for the triceps. For the 25 rep sets, machines or pulley devices that offer a more uniform tension on the muscles throughout the range of motion work very well. It will take some experimenting at first to determine the right load, but once you have dialed into it, it’s extremely effective for building large muscular arms.

7. Specific brachialis training.
The brachialis muscle is a widely neglected muscle in the bodybuilding world. However, every single bodybuilder who has phenomenal arm development sports a pair of fully developed brachialis muscles. When you see Ronnie Coleman do his back double biceps pose, his brachialis muscles are the tennis ball-shaped muscles you see between his triceps and biceps muscles. The brachialis muscle is better known among kinesiologists as the workhorse of elbow flexion. That is, it works in all elbow flexion movements, whether the forearm is pronated, supinated, or in between. When the forearm is supinated (palms-up grip), the biceps have an effective line of pull. However, when the forearm is pronated (palms-down grip), the biceps is rather ineffective in flexing the elbow. When your forearm is pronated, the brachialis takes the toll and pulls the resistance almost alone.

In order to objectively measure your brachialis muscle, you need specific work. Go on the Scott bench and curl five or six reps with maximum weight on the barbell curls with a supinated grip. After a 10-minute rest, you should be able to reverse curl with an EZ bar 76 percent of that weight for five or six reps. If you cannot do so, your brachialis muscle will need specific muscle work. If you don’t already do one of the various forms of reverse curls as part of your workout, adding it could surely result in 1/2 to one full inch of arm growth in a month’s time!

Related article:  5 Tips to Lose the Stubborn Back Fat

Make sure to always perform at least one specific brachialis exercise when training your upper arms. Your arsenal of brachialis exercises in the arms race include: reverse Scott curls (wide or narrow grip, low pulley or EZ bar), hammer curls, Gaspari bar curls, Zottmann curls (seated or one arm at a time on the Scott bench).

If you have neglected your brachialis muscles, here’s a very good program to pack size on them. This program involves what is called a post-exhaustion system. That is where you do a compound (multiple joint) exercise that recruits a lot of motor units, and follow it immediately with a superior isolation exercise that also taps well into the motor unit pool. Just by the amount of delayed onset muscle soreness you will get from this routine on your first go at it, you will be convinced of its efficacy at building large muscular arms. The routine looks like this:

Post-Exhaustion Cycle
A-1 Narrow Grip Pronated Pull-Ups 4 x 4-6 reps @ 4010 tempo
A-2 Pause Standing Reverse Curls 4 x 6-8 reps @ 3210 tempo
Rest 10 seconds between A-1 and A-2
Rest three minutes between A-2 and A-1
Rest 10 seconds between B-1 and B-2
Rest three minutes between B-2 and B-1

Notes:

The narrow grip pronated pull-ups are done palms pronated (facing away) and the grip width is four to six inches between the two thumbs. When you are resting the 10 seconds between the narrow grip pronated pull-up and the reverse curls, that should be the time it takes you to go from the pull-up bar to the EZ bar. At the end of 10 seconds, you should be curling the bar. In other words, keep the 10-second interval strict. If strong enough, use additional weight tied to a chin/dip belt for extra resistance.
For the reverse curls, the pause should be taken at 30 degrees of elbow flexion, which will increase the specific recruitment of the brachialis muscle. Be sure to fully stretch the elbow flexors at the bottom on each of the reps of the reverse curls. Curl the bar, keeping your upper arms perpendicular to the floor for at least the first 90 degrees of elbow flexion. This is to minimize anterior deltoid recruitment. After 90 degrees of flexion, particularly if the bar is heavy, your elbows will tend to move forward slightly. As long you keep the first 90 degrees clean, you will maximize isolation of the elbow flexors. By the same token, being too fixated about keeping the upper arm perpendicular to the floor through the full range of motion will only serve to activate the rear delts.
On the first workout of this routine, it’s normal to lose a lot of strength every succeeding superset. For example, you may be able to do six pull-ups with a 25-pounder supersetted with eight reps with 80 pounds on the bar in the first set. By the fourth set, you may only squeeze four reps at your bodyweight in the pull-ups and curl a 65-pound bar. As you go through this routine, besides increasing your arm size appreciably, your work capacity should radically improve.
As you can see there are plenty of tips that can jolt new growth in your arm development. Go ahead and experiment with them. I am convinced you will be extremely pleased with the results.

By Charles Poliquin

Sharing is caring!

21 comments

  1. Posted by Cornelius Zaborac, at Reply

    Personalmente, creo que este es el mejor trabajo de su parte.

  2. Posted by Alvaro Tichenor, at Reply

    Hi nieuw op het forum dus dacht id zeggen Hallo. Vraag voor jullie allemaal, wie is de beste persoon om te spreken over een project dat ik heb ondernomen op dit specifieke gebied.

  3. Posted by Kristie Exton, at Reply

    Vielen Dank für diese Art von nützlichen Informationen. Und Sie haben einen schönen Blog mit guten Posten, die sehr hilfreich für uns ist

  4. Posted by Elton Scarpone, at Reply

    Sorry dat ik stoor in deze blog, enig idee hoe kan mijn eigen thread te starten op deze website?

  5. Posted by Epifania Mitch, at Reply

    hello to you all, I am also new to the forums. Though I have joined a few moments ago, I’m lurking the forums at the moment, getting to know what’s happening.

  6. Posted by Girma Berhanu. Molla, at Reply

    It’s very useful and i accept it.

  7. Posted by Lincoln Janczunski, at Reply

    Es ist wahr, dass alle Informationen, die wir bekommen am Netz nicht immer trauen. Aber ich glaube, was du sagst, ist mehr trsutworthy über das Thema.

  8. Posted by Ajeet Yadav, at Reply

    Please share photos as well I told you in previous feedback . So please share photos .

  9. Posted by quantum vision systems, at Reply

    Very nice blog post. I definitely appreciate this website. Continue the good work!

  10. Posted by Octavio Bevers, at Reply

    Ich wünschte, ich hätte die Fähigkeit zu schreiben so gut wie Sie tun!

  11. Posted by does the quantum vision system work, at Reply

    I couldn’t resist commenting. Well written!

  12. Posted by Eduardo Sautter, at Reply

    Hey Buddy! Lees dan dit webplatform regels voor het plaatsen van reacties!

  13. Posted by Amee Boeving, at Reply

    Il suffit de dire salut, bon comme le forum 🙂

  14. Posted by Renato Kijowski, at Reply

    Great blog. Mon blog aussi ont beaucoup de trafic de Etats-Unis, l’Inde, le Royaume-Uni.

  15. Posted by Jules Whobrey, at Reply

    Grande articolo! Sono sicuro che questo sta per aiutare un sacco di gente

  16. Posted by Kaylee Madia, at Reply

    ik houd van deze website. veel geleerd van het. thnx

  17. Posted by Summer Vandenburgh, at Reply

    J’ai appris beaucouop de chose sur ce sujet grace à vous.

  18. Posted by Micheal Raudales, at Reply

    Gran artículo! Estoy seguro de que esto va a ayudar a mucha gente

  19. Posted by Jewel Callahan, at Reply

    I am surprised more people have not commented here because this is excellent work

  20. Posted by Pansy Archbold, at Reply

    Sei sicuro che le informazioni che hai dato è corretta al 100%?

  21. Posted by Marion Lagonia, at Reply

    Große Blog-Post. Es ist nützliche Informationen.